Leda-Lite International Ltd has manufactured an LED product that will retrofit any Pedestrian 'WAIT' push button sign.
Instead of using rough surface bulbs that require changing every so often, why not retrofit thes boxes with an LED product that will provide up to ten years of trouble free lighting?
The current lamp system can be replaced with Leda-Lite's LED product in just ten minutes.
Once installed, using the same connection as the rough surface lamp and the same voltage i.e. 48Volt Ac. The LED's can be switched sixty times in a minute if required without deterioration of the fitting or LED.
Unlike a rough surface bulb, there are no fillaments in an LED, meaning there is nothing to warm up and nothing to go cold which in turn weakens the filament in a lamp.
LED's are not affected by vibration as they are extremely robust and are of very solid state and soldered to a circuit board therefore in an area where there is a high volume of traffic, where a rough surface lamp may have cause to fail, LED's will not.
No other form of every day usage will disrupt this product.
Costing proves that, by installing the LED lighting in the push button 'WAIT' sign on pedestrian crossings, it could pay for itself in fifteen months or less before contractor's charges, lamp pricess and of course traffic management costs, which in some parts of the UK are extremely high.
Study the comparisonn charts below and see for yourself the advantages of Leda-Lite's 'WAIT' sign system.
Figures for 1 in number 'WAIT' sign - 'Rough Surface Lamp' system:
